MikroTik Gigabit Ethernet Surge Protector MikroTiK GESP
Article:
GESP
GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages.
Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.
Don’t forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.
-
Operating temperature:-40°C to +70°C
-
A type:Lightning protection module
-
Features:Transient current absorption with overvoltage response from 100 V / s to 1 kV / µs, RJ45 10/100/1000 Ethernet data line protection, The maximum capacitance is 4 pF at 1 MHz, The minimum insulation resistance is 1 GΩ at 50 V, Strum discharge 5 kA (8 / 20 µs), The maximum dynamic response voltage is 700 V at 1 kV / µs, Static operating voltage, DC 90 V at 100 V / s, ESD / EMI protection, Electrostatic discharge IEC 61000-4-2, On contact / air: ± 30 kV, Protection level IP67
-
PoE standard:IEEE 802.3af
-
Input connector:RJ-45
No reviews yet