Zalman PC case P60 without PSU, 2xUSB3.0, 1x Type C, 3x120мм ARGB Reverse, 2x120мм ARGB, VGA 435мм, LCS ready, Curved Tempered Glass, Dual Chamber, ATX, white

Durable removable tempered glass construction.

Removable glass installed from top to bottom ensures the safety and reliability of the system during transportation.

The grooved fastening on the bottom panel ensures quick and stable installation of the glass panel.

Convenient location of input/output ports:

Power button / LED backlight on/off button / Microphone and headphone jack Modern USB 3.0 and USB Type-C (high-speed port) connectors

Backlight control:

- changing colors and type of backlight is done using the button on the input/output ports;

- long press the button for 6 seconds: the RGB LED will turn off after a double flash of white light;

- long press the button for 3 seconds: RGB is synchronized with the motherboard after a single flash of white light;

To desynchronize the backlight with the motherboard, you must press the button again.

Active ventilation due to continuous perforation of the side panel.

Additionally, perforation is present on the top and bottom panels.

Reliable cooling 5 PWM ARGB fans installed, directly in the perforations to ensure active air circulation:

The fans can be connected to the motherboard or a special hub for automatic speed control. It is possible to control the fan lighting modes (independently or synchronized) using the built-in ARGB hub/button on the input panel or using the motherboard.

Location of 120 mm ARGB reversible fans: 3 pcs on the side panel (intake); 2 pcs on the rear panel (exhaust).

Characteristics of intake fans: - dimensions: 120 x 120 x 25 mm; - nominal voltage: 5~12 V; - performance: max. 46.6 CFM; - bearing type: hydraulic; - max. noise level: 27 dB(A).

Features of the exhaust fans: - dimensions: 120 x 120 x 25 mm; - nominal voltage: 5~12 V; - performance: max. 57.72 CFM; - bearing type: hydraulic; - max. noise level: 25 dB(A).

In general, the case has enough space for ten/eleven fans and CPU coolers up to 170 mm high.

The top panel can also be equipped with one (120 or 140), two (240 or 280), three - (360) section liquid cooling systems.

The rear panel can be equipped with one (120) section liquid cooling system.

The bottom panel can be equipped with one (120) section liquid cooling system, two (240), three - (360) section liquid cooling systems.

The design allows for the installation of BTF motherboards.

Designed with a special cutout for the rear connector and support for motherboards such as ASUS BTF and Gigabyte Project Stealth. The rear connection contributes to the rational organization of the internal space and neat arrangement of connection cables.

Rational cable management

The case has special holes with a rubber frame for convenient routing and fixing of cables. Additionally, there is a place for power supply cables.

A mount is provided for fixing the position of the video adapter

Design features:

• can be installed: 1 x Combo (3.5” or 2.5”) - maximum 2 SSDs in the 2.5” bay or 2 HDDs in the 3.5” bay (no tools required for installation - screwless mounting);
• 7 expansion slots; Mid-Tower format for ATX, Micro-ATX, Mini-ITX platforms;
• can accommodate an ATX power supply up to 180mm long, a CPU cooler up to 170mm high, a video adapter up to 435mm long;
• rubberized legs, the case is stable and does not vibrate;
• smart cable management - special holes are provided for neat cable routing;
• a holder for the video adapter is included.