Zalman PC case N7 PLUS V2 without PSU, 1xUSB3.0, 2xUSB2.0, 6x120mm RGB Rainbow, 1x120mm, VGA 340mm, LCS ready, TG Side Panel, ATX, black

The front panel is a metal set that will provide active circulation of air flows. The case will laconically fit into a modern interior. Included 7 x 120mm Rainbow RGB fans. Effective blowing of the internal space is ensured, due to the design features, and protection of components from dust is thought out. The case is equipped with all the necessary parts for assembly and further operation, there are standard modern current interfaces and connectors. Thoughtful cable management allows you to place the cables for connecting components neatly and rationally.

Materials: the case is made of durable steel with a black coating, which is applied by a special method. The coating is reliable and quite resistant to possible mechanical damage, friction. The case has no sharp or unpolished edges, which is important for independent or industrial assembly. The side panel is made of high-quality tempered glass with a convenient and practical reinforced mount (without screws) - emphasizes the visual effect of the case interior and looks stylish.

Optimized cooling: The kit includes 7 pcs 120mm Rainbow RGB fans: 3 pcs on the front panel, 2 pcs on the top panel and one fan on the rear and side panels. Bright Rainbow RGB backlighting of the fans attracts attention.

The fans are connected to the controller. Using the button on the input panel, you can adjust the speed and brightness of the fans in four modes:

1. Fan speed: 100% / LED Brightness: 100%
2. Fan speed: 70% / LED Brightness: 70%
3. Fan speed: 70% / LED Brightness: Off
4. Fan speed: Off / LED Brightness: Off

Specification of installed fans (front / top / rear panels):

Dimensions: 120 x 120 x 25(H)mm

Rated voltage: DC 12V

Rated current: 0.196A

Bearing type: Hydraulic

Noise level: 23dB(A)

Efficiency: 35CFM

Maximum speed: 1,000RPM ±10%

Connector type: IDE-4 Pin

Specification of the installed fan (side panel):

Dimensions: 120 x 120 x 25(V)mm

Nominal voltage: DC 12V

Bearing type: Hydraulic

Noise level: 21.5dB(A)

Efficiency: 32CFM

In general, the case has enough mounting places for nine fans and a CPU cooler up to 160mm high. One- (120/140), two- (240/280), three-section liquid cooling systems can be installed on the front panel. One- (120/140), two- (240/280) section liquid cooling systems can be installed on the top panel. A single (120) section liquid cooling system can be installed on the rear panel.

The right side panel has a perforated insert, which further facilitates the effective removal of heated air from the PC components.

Dust filters.

Located on the top, bottom and side panels (behind the perforated insert).

Easy access

Power control button, reset, audio ports, 2 x USB 2.0, 1 x USB 3.0, indicators are located on the top panel.

Design features:

• can install up to 1 x Combo (3.5’’ or 2.5’’), 1 x 3.5”, 1 x 2.5” (no tools required for installation – screwless fastening);
• 7 expansion slots; • Mid Tower format for ATX, Micro-ATX, Mini-ITX platforms;
• can accommodate an ATX standard power supply up to 180 mm long, cooling for a processor up to 160 mm high, a video adapter up to 340 mm long;
• rubberized feet, stable body that does not vibrate;
• smart cable management – ??holes are provided for neat cable routing.