Switch 24xGE, EasySmart D-Link DGS-1100-24V2
- 24 x 10/100/1000BASE-T ports
- Fanless design for silent operation
- Bandwidth Control ensures latency-sensitive traffic always gets the bandwidth it needs
- Quality of Service further prioritizes latency-sensitive traffic, ensuring timely delivery
- Segregate different types of traffic, such as surveillance or voice, with VLANs to heighten security
- IGMP Snooping sends multicast traffic only where it needs to go, significantly cutting down network traffic
- Innovative energy saving features are good for your budget, as well as the environment
- Get up and going quickly with streamlined first-time setup and ongoing management
Gigabit Ethernet Speeds
Take your Ethernet speeds to the next level with Gigabit Connectivity
Cutting Edge Green Technology
Innovative D-Link Green power saving features keep your budget in check
Manage Anywhere, Anytime
Remote setup & management is easy, and can be done from anywhere.
Easy to Use & Easy to Install
D-Link Network Assistant Utility (DNA) can quickly discover and do initial setup for D-Link Networking devices such as the DGS-1100 Series, which greatly improves efficiency for solution deployment.
VLANs: Stronger Security & Better Traffic Management
Relatively easy to set up, VLANs can be a big boon for your network. They can isolate sensitive areas of your network, providing more protection from those with malicious intent, or keeping bandwidth open for latency-sensitive traffic such as VoIP.
For Voice
If VoIP calls make up a large slice of your network usage, separating them onto their own VLAN can ensure they get the bandwidth they need for smooth conversations without lag or jitters.
For Surveillance
If you have surveillance cameras and devices attached to your network, putting them onto their own VLAN keeps surveillance footage running seamlessly. At the same time, it can help prevent a variety of malicious attacks by restricting access to different network areas.
Green Technology
D-Link Green technology enables the DGS-1100 Smart Managed Switches to save power without sacrificing performance. Most of the models in the series utilize a fanless design, for silent and energy-efficient operation. All are IEEE 802.3az-compliant and feature Link Status detection and Time-Based PoE.
-
Certificates:CCC, BSMI, CE LVD, cUL, CB
-
Security:CB, cUL, CCC, BSMI, Broadcast/Multicast/Unknown Unicast Storm protection, Traffic Segmentation, SSL, D-Link Safeguard Engine, Preventing attacks DoS
-
A type:Switch
-
Ports:24 x 10/100/1000Base-T
-
Switch Type:customizable
-
Number of ports:24
-
Standards and Protocols:IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3ab 1000BASE-T, IEEE 802.3u, IEEE 802.3, 802.3az Energy Efficient Ethernet
-
Functions:IGMP snooping, Port Mirroring, 802.3x Flow Control, Loopback Detection function, IGMP Snooping Querier, LLDP, D-Link Single IP Management, Many-to-One mode, One-to-One mode, Half/full duplex for 10/100 Mbps, Full duplex for 1000 Mbps, Cable diagnostics, IGMP v1/v2/v3 Snooping, Voice VLAN, 802.1D-2004 STP, 802.1w RSTP, Spanning Tree Protocol
-
Contents of delivery:Switch, Quick Setup Guide, Power cord, mounting brackets for installation into a 19-inch rack, rubber feet, Installation kit
-
Dimensions, mm:280 x 180 x 44
-
Transmission Method :Store-and-forward
-
Indicators:Power (per device), Link/Activity/Speed (per port)
-
Switching matrix Gbit/sec:48
-
MAC Address Table k:8
-
Jumbo frames byte:10240
-
Packet transmission rate Mpps:35.71
-
Buffer Size Mbit:512
-
Power consumption in the standby mode W:15.9
-
Max. Power Consumption W:4.5
-
Heat dissipation BTU/h:54.3
-
Operating humidity:0% to 95%
-
Storage humidity:from 0% to 95%
-
MTBF (Mean Time Between Failures) h:424762
-
Storage temperature:from -40 to 70 °C
-
The weight g:1.32
-
Control:Web-based interface
-
FLASH-memory MB:16
-
RAM memory Gb:128
-
Operating temperature:-5 tо 50 °C
-
CPU nominal frequency, GHz:0.5