Споживчі товари та електроніка MikroTiK
10 879 грн
8 618 грн
RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.
Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output), 802.11ac support and IPsec hardware encryption support. The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards, and will provide coverage in 360 degrees around it.
wAP ax brings fast and reliable Wi-Fi 6 to your countryside getaway or any other challenging environments – like a rural gas station or a bus stop. wAP’s legendary weatherproof form-factor has been tested for several generations all across the globe, and remains a favorite among MikroTik users for its simplicity and durability. A mighty dual-band, dual-chain (2x2 MIMO) radio ensures fast and reliable wireless connection both indoors and outdoors.
The new AC standard is here, with up to 866Mbit over the air datarate, 256-QAM modulation, and 80MHz channels. 802.11a/n/ac opens up new possibilities and speeds never possible before. The SXT ac is a new member in our 802.11ac product lineup, currently two models are available — with regular 28 degree antenna, and the SA model with a 90 wide beam - width sector antenna. Also support 802.11a/n standard, Nstreme and Nv2 protocols and are compatible with all legacy RouterBOARD devices. Both devices come with Gigabit Ethernet.
With this kit you can mount up to four RB5009UG+S+IN routers in a single 1U rackmount space! No more server-room-Tetris, just pure productivity.
12 834 грн
10 942 грн
Like the previous LHG LTE models, this is a last mile-internet solution for situations when even your phone might not have any signal. The new LHG comes with a cutting-edge Category 18 LTE modem – for the fastest mobile internet no matter where you are. This kit supports speeds up to one Gbps! Due to its large high-gain 17 dBi antenna, LHG LTE18 kit can connect to cell towers in extreme rural locations where nothing else is available. There is a massive heat sink, so you don’t have to worry about overheating. The grid antenna design can withstand harsh, windy weather. And it can be mounted in different ways, including poles and masts.
23 192 грн
17 789 грн
The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.
11 408 грн
8 238 грн
The ultimate heavy-duty home lab router with USB 3.0, 1G and 2.5G Ethernet and a 10G SFP+ cage. You can mount four of these new routers in a single 1U rackmount space! Unprecedented processing power in such a small form factor.
14 786 грн
12 115 грн
RB5009UPr+S+IN - new version of our popular heavy-duty RB5009 router with PoE-in and PoE-out on all ports. Perfect for small and medium ISPs. 2.5 Gigabit Ethernet & 10 Gigabit SFP+, numerous powering options.
The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides.
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
564 грн
472 грн
MikroTik SAW30-240-1200GR2A - 24V 1.2A power supply with angled plug. Input voltage - 110/220V; output voltage - 24V, 1.2A.
The RMK-2x10/19 accessory lets you mount two CSS318-16G-2S+IN switches side-by-side in a single 1U slot of a standard 19-inch rack. Clean, compact, and efficient — it’s the ideal way to keep your setup neat without wasting valuable rack space. One click is all it takes!
16 999 грн
13 901 грн
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. Support DDM. SFP/ SFP+/ SFP28
2 714 грн
2 254 грн
A cost-effective 1.25G SFP, 10G SFP+ and 25G SFP28 module for shorter distances: up to 100 meters in full- duplex 25 Gigabit mode. Its compatibility with different speeds and the affordable price makes it a versatile solution for various setups of any scale - including bestsellers like the RB5009, CCR2116, netPower series or a variety of CRS and CSS switches.
369 грн
341 грн
A simple, durable alignment attachment for the SXTsq series products. Attach it to the back of the SXTsq using a Ph1 screwdriver, mount everything on a pole using the provided U bolt and an 8 mm ratchet, then place the bolt in one of the three positions - these enable fine adjustments up to 45 degrees in both directions!
MikroTik RMK-2/10 rack mounting kit RMK-2/10. The RMK-2/10 allows two smaller MikroTik form factor devices to be mounted in traditional 19" racks, for example, neat and convenient SR-10U. Alternatively, you can remove part of the bracket to mount one 200mm device in a classic 10" rack.
Mount it under the table or put it on the table – like we do it in our testing department. You can even attach a multi-plug extension cord to the back of this sturdy and lightweight aluminium rack. The package includes screws for 10 devices, as well as nuts and screws for mounting the rack itself. While this is not a revolutionary product, we hope it can make the lives of system administrators, engineers, and testers a little bit easier. Compatible with all MikroTik (and other vendor!) devices that would fit in a standard 19” rack. But there’s more! With the small K-79 accessory kit, you can fit up to four RB5009UG+S+IN routers in a single 1U rackmount space or up to 40 routers in total!
The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel, the mount attaches to a wall and allows the ethernet cables to be plugged in, before the router is mounted inside. This means that once the device is secured, there is no easy way to unplug cables, or move the device.
Rackmount ears for RB4011 series, for installing units in standard rack.
699 грн
643 грн
The LHG mount is the basic adapter for mast mounting of LHG series access points. Mount MikroTik Simple metallic mount for LHG products. Base bracket for mounting all LHG devices on the mast. Metal design. Full compatibility with LHG series including LHG XL models. Included with Wireless Wire Dish.
12 313 грн
10 055 грн
The MikroTik G1270 is a 750 W open frame power supply designed for high-performance networking equipment such as the CRS354-48P-4S+2Q+RM switch. It supports a wide input voltage range of 90–264 V AC and provides dual outputs: 53 V⎓ 13.5 A and 26.5 V⎓ 27 A.
9 841 грн
7 660 грн
The G1070 power supply is a 500W high-performance adapter designed for use with the MikroTik CRS328-24P-4S+RM. It provides stable and reliable power to ensure uninterrupted network operation. With high efficiency and quality components, it guarantees durability and long-term performance.
Hot-swap 54.5V 10.35A 600W power supply for the CRS320-8P-8B-4S+RM PoE++ switch. The switch comes with a single 600W PSU and an expansion slot for a second PSU that can raise the total power output all the way to 1150 Watts, up to 90 Watts per PoE++ port.