Тестер DIGITUS для сетевых кабелей, RJ45 & BNC
Артикул:
DN-14001-1
Суперцена
Оставить отзыв
Есть в наличии
Способы доставки
- Самовывоз из Новой почты
- Курьер Новой Почты
- Самовывоз из магазина
- Другие транспортные службы
Способы оплаты
- Наличными при получении
- Безналичный перевод
- Приват 24
- WebMoney
FEATURES
- With the cable tester you can easily check if your network cabling is correct and immediately detect if an Ethernet cable is not installed correctly;
- In addition to a pure continuity check, it can also check whether two strands were swapped or are causing a short-circuit: thanks to the remote unit, this is possible even for installation cables that have already been installed;
- Depending on the circumstances, you can switch between the manual test and an automatic check loop test that systematically tests one strand after another and then starts again from the beginning;
- The PoE tester shows you whether a PoE signal is present at a port or network socket and which PoE mode is involved: the PoE finder is compatible with PoE standards af & at;
- The testing device is suitable for all network cables, from Cat-3 & Coax BNC to Cat-5 & Cat-6 and Cat-7A as well as UAE, TAE and telephone cables, and is useful during cable installation for your DSL connection for example.
-
Тип:Тестер
-
Описание:Размеры, Тип индикации: аналоговая
-
Комплектация:Основное устройство, Удаленное устройство, PoE тестирующее устройство, BCN адаптер кабель, BNC plug/plug адаптер, Переходник из RJ45 на RJ11, Инструкция пользователя, Кейс для хранения
Пока нет комментариев